AMPLIFY TABLAS PERCUSSION. Cajón, hang, tablas (India), congas pickups.

<<	Consulting

Drum Pickups
TAV Pickups TB68 Series

Attention: You will find many technical data, graphs of the frequency response and installation details on our spanish web site with translator. Click here.

Pickup TB68/PK Pickup TB68/1P TB68/T-J.Rallo

TB68/1P. One drum pickup

Instruments: congas, bongos, etc.
Impedance: 25K ohms.
Size: diameter: 22mm. height: 6.5mm. aprox.
Fixing: by adhesive tape.
Pickup cable: 0.3m. shielded with RCA connector.
Output cable: 3m. shielded with RCA connector and Jack 1/4".
Packaging: Wooden box.

TB68/2P. Two drum pickups

Instruments: Single instruments.
Impedance: 12K ohms.
Size: diameter: 22mm. Height: 6.5mm. aprox.
Fixing: by adhesive tape
Pickup cables: 2 x 0.4m. shielded with RCA's.
Output cable: 3m. shielded with RCA connector and Jack 1/4".
Packaging: Wooden box.

TAV pickups. Tablas with the TB68/JR pickup

TB68/PK One pickup drum

Impedance: 24K ohms.
Fixing: by tab or adhesive tape
Size of the tab: 15 x 12 mm.
Pickup cable: shielded 0.4m. with RCA connector
Output cable to amplifier: 3m. shielded with RCA connector and Jack 1/4".
Packaging: Wooden box.

TB68/J.R. Two pickups tabla

Impedance: (Pickups in parallel) 12K ohms.
Fixing: by tab.
Size of the tabs: 16x13mm.(Tabla) and 22x18 mm.(Baya)
Pickup cables: 0.45m (Tabla) and 0.25m. (Baya)
Output cable to amplifier: 3m. shielded with RCA connector and JACK 1/4".
Packaging: Wooden box.

The kit TB68/Tablas series

Small "Tabla pickup" with 0.45m. shielded cable.
Large "Baya" pickup with 0.25m shielded cable.
United into a single female connector/velcro attached to the baya.
3m output cable. with 1/4" output jack.
Features sheet.
Wooden box.

Installing the TB68/T J.Rallo set on the "Tablas"
Installing the pickups is easy, as it just involves inserting the tabs under each of the peripheral patches. These tabs are flat enough not to deform the skin at all. On the other hand, its tension allows maintaining to the fixed pickup, without undesirable vibrations and without using double-sided adhesive tape. It is advisable to test the position of the pickups until get the best sound in an area that does not hinder performance.
In the installation process we will first place the pickup tab for the "baya" (large size) under the patch of its external area, as can be seen in the photos. Next, we will fix, with the incorporated velcro, the output connector vertically on its metal body. Next, we will fix the small pickup on the "tabla".